Need help with
STERRAD® Solution
Contact us

Find out which devices fall within the cleared claims for sterility – Check out our interactive guide.

Sterrad NX<sup>®</sup>Image

STERRAD NX ®

Speed and versatility in a compact size

Designed with the Next Generation technology, the STERRAD® NX® System is ASP's compact size sterilizer ideal for use anywhere in the hospital:

  • Two tiered 30 liter chamber and two cycle options for increased productivity:
    • 28-minute Standard cycle for most surgical instruments
    • 38-minute Advanced cycle for single-channel flexible endoscopes
  • Space-efficient STERRAD® NX® System can be easily cart-mounted and moved where needed
  • Provides terminally sterile, packaged instruments thereby eliminating the need to compromise with liquid biocides

Consult the STERRAD® Sterility Guide, www.sterradsterilityguide.com, refer to the STERRAD® Sterilization System User's Guide or contact medical device manufacturer for the detailed processing information

Features and Benefits
Specifications
Downloads
 

A sterilizer for all your department's needs

The rapid 28-minute Standard cycle time combined with the dry gentle sterilization process make the compact STERRAD® NX® the ideal choice for every department where rapid instrument turnaround is crucial. STERRAD® NX® raises the standard of care by providing terminally sterile, packaged instruments at hand when you need them.

  • A Standard cycle time of 28 minutes for most surgical devices or an Advanced cycle of 38 minutes for single-channel flexible scopes ensure quick instrument turnaround and eliminate the need for duplicate inventories
  • As all other STERRAD® systems, STERRAD® NX® is safe for healthcare professionals, patients, instruments and environments. The process by-products are non-toxic oxygen and water vapor. Requires a simple, standard electrical outlet, which combined with its compact size allows for maximum mobility. No special heat boosters, plumbing, aeration, or ventilation required
  • Includes innovative software that allows heightened security, networking, and diagnostic abilities

STERRAD® NX® System Specifications

Technical Specifications

Total Cycle Time 28/38 minutes
Standard/Advanced cycles
Cycle   Temperature Less than 55°C
Height
Width
Depth
System only System with cart
83.4 cm 
55.9 cm 
80.6 cm
157.7 cm
60.9 cm 88.8 cm
Weight 125 kg 187 kg
Sterilization Chamber Configuration Rectangular
Total Chamber Volume 51.3 L
Usable Chamber Volume 30 L
Two-Tiered Shelf 31.2 cm x 59.9 cm (WxD)
Chamber
Placement Countertop or cart-mounted for mobility
Connections Single phase dedicated circuit with dedicated hot and neutral wires. Wire gauge sufficient to maintain 220–240 VA C w/ 10 amp continuous & 20 amp momentary current.*
 
*The STERRAD® NX® Sterilizer has a vacuum pump which will cause the sterilizer to draw up to 20 amps of current for 1 to 2 seconds when the pump starts. If the wire gauge is too small, when the vacuum pump starts the line voltage at the outlet will drop to a level which can cause the sterilizer to reboot. Have the electrician use a voltage drop calculator to ensure the line voltage at the outlet does not drop below 198 Volts AC during the 1 to 2 seconds of 20 amps current draw.
Service Requirements In operation, the STERRAD® NX® System should not be placed closer than 25 mm to a wall at the rear. The sterilizer should be installed in a space of sufficient size to permit access to all 4 sides of the system. Service access requires a minimum clearance of 61 cm above the top and 61 cm to the right of the system. The power receptacle should be positioned 30.5 cm to 61 cm above the floor.
Operational Environment Temperature 18°C to 35°C
Humidity 10% to 85% up to 30°C ambient, linearly decreasing from 85% at 30°C to 70% at 35°C
Cart with Locking Wheels
Height
Width
Depth
73.3 cm
60.9 cm
88.8 cm
Weight 62 kg
Independent Monitoring System (IMS) Enables remote, independent monitoring of all processes and is available as an option
Barcode Reader Available as an option

Find out more about the STERRAD® NX® System

Download Adobe Acrobat or Macromedia Flash for viewing files. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.

 

 

Confirmation link
 

This link will take you to a Web site to which this Privacy Policy does not apply.

We encourage you to read the Privacy Policy of every Web site you visit.