Proven performance for cost-effective sterilization using ASP's original gas plasma technology STERRAD® 100S continues to be the system of choice for facilities looking for a proven, reliable, and cost-effective low-temperature sterilization solution:
Consult the STERRAD® Sterility Guide, www.sterradsterilityguide.com, refer to the STERRAD® Sterilization System User's Guide or contact the medical device manufacturer for detailed processing information.
ASP offers the STERRAD® 100S System, a proven cost-effective sterilization solution.
Safely and effectively sterilizes a wide range of instruments, including flexible endoscopes with lumens made from polyethylene or Teflon® and having an inside diameter of ≥ 1 mm and a length of ≤ 500 mm or an inside diameter of ≥ 1 mm and a length of > 500 mm but ≤ 2000 mm.
Technical Specifications | ||||
Total Cycle Time | Short Cycle 54 minutes Long cycle 72 minutes |
|||
Cycle Temperature | Less than 55°C | |||
Dimensions and Weight | ||||
Height | 1664 mm | |||
Width | 7625 mm | |||
Depth | 1046 mm | |||
Weight | 350 kg | |||
Sterilization Chamber | ||||
Configuration | Circular | |||
Chamber volume | 173 L * | |||
Shelf Dimensions | Upper shelf:700 mm x 425 mm Lower shelf: 760 mm x 325 mm |
|||
Installation and Electrical Requirements | ||||
Placement | Freestanding with built-in wheels for mobility | |||
Connections | 380-415 VAC, 50 Hz , 10 A, 3-phase circuit with separate neutral and ground conductors. CBA phase rotation | |||
Service Requirements | In operation, the STERRAD® 100S System should not be placed closer than 5 cm to a wall at the rear and/or sides of the system. The sterilizer should be installed in a space of sufficient size to permit access to all 4 sides of the system when it is rolled from the rear and/or side walls a distance of 3 m. Service access requires a minimum clearance of 1 m on all sides of the system. The power receptacle should be positioned 30.5 cm to 61 cm above the floor. | |||
Operational Environment | ||||
Temperature | 10°C to 40°C | |||
Humidity | 30-75% relative humidity (non-condensing) |
*Please contact your ASP representative to determine maximum capacity based on your facility's particular sterilization load configuration(s).
Download Adobe Acrobat or Macromedia Flash for viewing files. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
This link will take you to a Web site to which this Privacy Policy does not apply.
We encourage you to read the Privacy Policy of every Web site you visit.