The EVOTECH® Endoscope Cleaner and Reprocessor (ECR) is the first commercially available system that both cleans* and high-level disinfects endoscopes. With a safe and fast automated process, it simply makes labor-intensive and time-consuming manual endoscope processing a thing of the past.
The integrated solution of the EVOTECH® ECR, plus CIDEX® OPA•C Solution and
CIDEZYME® GI Enzymatic Detergent Solution is specially formulated for cleaning and high-level disinfection of heat-sensitive (>60° C) endoscopes.
System
Total Cycle Time
33 minutes or less (under nominal conditions)
Basins Per System 2
Scopes Per Basin 1
Height (lid closed) 46 in/117 cm
Height (lid opened) 58 in/147 cm
Width (without printer) 37 in/94 cm
Width (with printer) 46 in/116 cm
Depth 33 in/84 cm
Weight (when empty) 500 lb/226.8 kg
Basin Size 18.25 in x 19.75 in x 5.75 in
(46.4 cm x 50.2 cm x 14.6 cm)
EVOTECH® ECR 208 VAC, 3~, 60 Hz, 30 A, 4-Wire
3-phase NEMA L 15-30
Printer 110 VAC
Pressure 40 PSI (275 kPa) minimum dynamic pressure during flow rate of 1.6 gallons per minute per minute at EVOTECH® ECR inlet per basin
Hardness Soft water
Incoming Temperature 41°F to 86°F (5°C to 30°C); usage may be affected below 59°F (15°C)
Agents CIDEX® OPA Concentrate Solution
Temperature 64°F to 86°F (18°C to 30°C)
Relative Humidity 10% to 80% noncondensing
Elevation 3000 meters (maximum)
Please view the comprehensive EVOTECH® Endoscope Cleaner and Reprocessor Installation Requirements and Product Specifications.
This link will take you to a Web site to which this Privacy Policy does not apply.
The availability of, or inclusion of a link to, any such site or property on the Site does not imply endorsement of it by ASP or by our affiliates.