The deep cleaning action of ENZOL® Enzymatic Detergent helps you reduce bacterial burden before instruments are disinfected or sterilized.
ENZOL® Enzymatic Detergent can be used anywhere in the following areas you process instruments:
ENZOL® Enzymatic Detergent is a mild pH detergent offering compatibility with a wide range of metal, nonmetal, and plastic devices, as well as elastomers.
Metals | |
Stainless Steel | Copper |
Brass | Aluminum* |
Carbon Steel* | |
Plastics and Elastomers | |
Low density polyethylene | Polypropylene |
Polyethylene Terephthalate (Polyester) | Polymethylmethacrylate (Acrylic) |
Polycarbonate | Polyvinylchloride (PVC) |
Polysulfone | Polyphenylsulfone |
Polystyrene† | Nylon†† |
Acrylontrile-Butadiene-styrene (ABS)§ | Natural rubber |
Polychloroprene Rubber (Neoprene) | Styrene-ethylene-butadiene-styrene (Kraton) |
Silicone Rubber | Polyurethane¶ |
Thermosets | |
Epoxy | Phenolic Resin|| |
For More Information | |
For more information on ENZOL® Enzymatic Detergent , please contact ASP Customer Support at 888-783-7723 or aspserve@its.jnj.com. |
*Do not use ENZOL® Enzymatic Detergent with carbon steel materials for longer than 5 minutes to prevent corrosion, or with aluminum materials for longer than 8 hours to prevent slight discoloration.
†Do not use ENZOL® Enzymatic Detergent with polystyrene materials at temperatures above 25°C (77°F), as exposure at higher temperatures may cause discoloration and crazing.
††Do not use ENZOL® Enzymatic Detergent with nylon materials for longer than 1 hour or at temperatures above 25°C (77°F), as exposure for longer times or higher temperature may cause discoloration, reduced tensile strength, and increased elongation.
§Do not use ENZOL® Enzymatic Detergent with acrylonitrile-butadiene-styrene (ABS) materials for longer than 1 hour, as exposure for longer times may cause reduced elongation.
¶Do not use ENZOL® Enzymatic Detergent any aqueous solution (e.g., water saline solution with polyurethane materials for longer than 1 hour or at temperatures above 25°C (77°F), as exposure for longer times or higher temperatures may cause reduced tensile strength and changes in elongation properties.
||Do not use ENZOL® Enzymatic Detergent, or any aqueous solution (e.g., water, saline solution) with phenolic resin materials for longer than 1 hour or at temperatures above 25°C (77°F), as exposurefor longer times or higher temperatures may cause reduced tensile strength and changes in elongation properties.
This link will take you to a Web site to which this Privacy Policy does not apply.
The availability of, or inclusion of a link to, any such site or property on the Site does not imply endorsement of it by ASP or by our affiliates.