Print Close

Fast-acting Enzymatic Cleaning Power

The deep cleaning action of ENZOL® Enzymatic Detergent Solution helps you reduce bacterial burden before instruments are disinfected or sterilized.

  • Proteolytic enzymes help reduce need for mechanical cleaning and unnecessary exposure to contaminated equipment
  • Penetrates and breaks down proteinaceous matter such as blood, mucous, and feces
  • Can be used in automated equipment: endoscope reprocessors, ultrasonic cleaners, and washer-sterilizers/decontaminators according to manufacturers' recommendations
  • Features & Benefits
  • Specs
  • Proper Use & Testing
  • Downloads
  • Support
  • FAQs

Appropriate for Any Place You Process Instruments

ENZOL® Enzymatic Detergent Solution can be used anywhere in the following areas you process instruments:

Highly Compatible with Your Equipment Materials

ENZOL® Enzymatic Detergent Solution is a mild detergent offering compatibility with a wide range of metal, nonmetal, and plastic devices as well as elastomers.

Metals
Stainless Steel Copper
Brass Aluminum*
Carbon Steel*  
Plastics and Elastomers
Low density polyethylene Polypropylene
Polyethylene Terephthalate (Polyester) Polymethylmethacrylate (Acrylic)
Polycarbonate Polyvinylchloride (PVC)
Polysulfone Polyphenylsulfone
Polystyrene† Nylon††
Acrylontrile-Butadiene-styrene (ABS)§ Natural rubber
Polychloroprene Rubber (Neoprene) Styrene-ethylene-butadiene-styrene (Kraton)
Silicone Rubber Polyurethane
Thermosets
Epoxy Phenolic Resin||
For More Information
For more information on ENZOL® Enzymatic Detergent Solution, please contact ASP Customer Support at 888-783-7723 or aspserve@its.jnj.com.

*Do not use ENZOL® Enzymatic Detergent Solution with carbon steel materials for longer than 5 minutes to prevent corrosion, or with aluminum materials for longer than 8 hours to prevent slight discoloration.

†Do not use ENZOL® Enzymatic Detergent Solution with polystyrene materials at temperatures above 25°C (77°F), as exposure at higher temperatures may cause discoloration and crazing.

††Do not use ENZOL® Enzymatic Detergent Solution with nylon materials for longer than 1 hour or at temperatures above 25°C (77°F), as exposure for longer times or higher temperature may cause discoloration, reduced tensile strength, and increased elongation.

§Do not use ENZOL® Enzymatic Detergent Solution with acrylonitirile-butadiene0-styrene (ABS) materials for longer than 1 hour, as exposure for longer times may cause reduced elongation.

Do not use ENZOL® Enzymatic Detergent Solution any aqueous solution (e.g., water saline solution with polyurethane materials for longer than 1 hour or at temperatures above 25°C (77°F), as exposure for longer times or higher temperatures may cause reduced tensile strength and changes in elongation properties.

||Do not use ENZOL® Enzymatic Detergent Solution, or any aqueous solution (e.g., water, saline solution) with phenolic resin materials for longer than 1 hour or at temperatures above 25°C (77°F), as exposurefor longer times or higher temperatures may cause reduced tensile strength and changes in elongation properties.

Find us at ASPJJ-Twitter ASPJJ-Youtube

Capitalized product names are trademarks of Advanced Sterilization Products.
CLEANASCOPE is a registered trademark of Medicart International Limited.
This site is published by ASP, which is solely responsible for its contents. It is intended for visitors from the United States.
© Ethicon, Inc. 2000-2011.  ADVANCED STERILIZATION PRODUCTS, Division of Ethicon Inc., a Johnson & Johnson company.
Last Updated On: June 29 2011 Release Number 2010-1.00

AD-100118-01-US_A