Rapid turnaround in a compact low temperature sterilizer
Speed and versatility in a compact size
Designed with the Next Generation technology, the STERRAD® NX® System is ASP's compact size sterilizer ideal for use anywhere in the hospital:
- Two tiered 30 liter chamber and two cycle options for increased productivity:
- 28-minute Standard cycle for most surgical instruments
- 38-minute Advanced cycle for single-channel flexible endoscopes
- Space-efficient STERRAD® NX® System can be easily cart-mounted and movedwhere needed
- Provides terminally sterile, packaged instruments thereby eliminating the need tocompromise with liquid biocides
How to purchase
Finance options
Contact ASP consultant
Consult the STERRAD® Sterility Guide, www.sterradsterilityguide.com, refer to the STERRAD® Sterilization System User's Guide or contact medical device manufacturer for the detailed processing information.
A sterilizer for all your department's needs
The rapid 28-minute Standard cycle time combined with the dry gentle sterilization process make the compact STERRAD® NX® the ideal choice for medical device sterilization in every department where rapid instrument turnaround is crucial. STERRAD® NX® raises the standard of care by providing terminally sterile, packaged instruments at hand when you need them.
- As all other STERRAD® systems, STERRAD® NX® is safe for healthcare professionals, patients, instruments and environments. The process by-products are non-toxic oxygen and water vapour. Requires a simple, standard electrical outlet, which combined with its compact size allows for maximum mobility. No special heat boosters, plumbing, aeration, or ventilation required
- Includes innovative software that allows heightened security, networking, and diagnostic abilities
STERRAD® NX® System Specifications
Technical Specifications
| Total Cycle Time | 28/38 minutes Standard/Advanced cycles |
||||||
| Cycle Temperature | Less than 55°C | ||||||
| Height Width Depth |
System only | System with cart | |||||
| 83.4 cm 55.9 cm 80.6 cm |
157.7 cm 60.9 cm 88.8 cm |
||||||
| Weight | 125 kg | 187 kg | |||||
| Sterilization Chamber Configuration | Rectangular | ||||||
| Total Chamber Volume | 51.3 L | ||||||
| Usable Chamber Volume | 30 L | ||||||
| Two-Tiered Shelf | 31.2 cm x 59.9 cm (WxD) | ||||||
| Chamber | |||||||
| Placement | Countertop or cart-mounted for mobility | ||||||
| Connections | Single phase dedicated circuit with dedicated hot and neutral wires. Wire gauge sufficient to maintain 220–240 VA C w/ 10 amp continuous & 20 amp momentary current.*
|
||||||
| Service Requirements | In operation, the STERRAD® NX® System should not be placed closer than 25 mm to a wall at the rear. The sterilizer should be installed in a space of sufficient size to permit access to all 4 sides of the system. Service access requires a minimum clearance of 61 cm above the top and 61 cm to the right of the system. The power receptacle should be positioned 30.5 cm to 61 cm above the floor. | ||||||
| Operational Environment Temperature | 18°C to 35°C | ||||||
| Humidity | 10% to 85% up to 30°C ambient, linearly decreasing from 85% at 30°C to 70% at 35°C | ||||||
| Cart with Locking Wheels | |||||||
| Height Width Depth |
73.3 cm 60.9 cm 88.8 cm |
||||||
| Weight | 62 kg | ||||||
| Independent Monitoring System (IMS) | Enables remote, independent monitoring of all processes and is available as an option | ||||||
| Barcode Reader | Available as an option | ||||||
Find out more about the STERRAD® NX® System
STERRAD® NX® System Leaflet
[.pdf 174kb]
STERRAD® NX® System Wall Chart
[.pdf 150kb]
STERRAD® NX® Sterilization System White Paper
[.pdf 198kb]
"What Can I Sterilize in the STERRAD® NX® Sterilizer?" Brochure
[.pdf 247kb]
Download Adobe Acrobat or Macromedia Flash for viewing files. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
