Find out which devices fall within the cleared claims for sterility – Check out our interactive guide.

Next generation low temperature sterilizer

Designed with the Next Generation technology, the STERRAD® 100NX System is the most advanced low temperature gas plasma sterilizer from ASP:

  • Large rectangular chamber and several cycle options for the most productivity
  • 47-minute Standard Cycle for most surgical instruments.
  • 42-minute Flex Cycle for single-channel flexible endoscopes
  • 24-minute Express Cycle for fast turnaround of da Vinci® 3-D endoscopes*, rigid
    telescopes, rechargeable batteries, and many other instruments.
  • 60 minute DUO Cycle for processing flexible endoscopes and cameras together
  • Advanced features for ease of use and quality control including large
    touch-screen display, innovative foot pedal to facilitate the loading process,
    hydrogen peroxide monitor to check that sufficient hydrogen peroxide is
    available to assist in achieving a sterility assurance level (SAL) of 10-6,
    network connectivity for remote cycle monitoring and many others.
  • Available as a pass-through sterilizer for the Central Sterilization Departments
    with a need for separation of clean and sterile areas.

Please refer to the STERRAD® 100NX® User's guide for more detailed processing information.

* da Vinci® 3-D endoscopes are validated for use in the STERRAD® 100NX® System EXPRESS
cycle and are not validated for use in the STERRAD® 100NX® System STANDARD and FLEX

Consult the STERRAD® Sterility Guide,, refer
to the STERRAD® Sterilization System User's Guide or contact medical device
manufacturer for the detailed processing information.

Features and Benefits

The Benefits of Next Generation Sterilization

The STERRAD® 100NX® System uses the Next Generation (NX) sterilization technology of hydrogen peroxide concentration that allows for the sterilization of narrower lumens with a shorter cycle time comparing to the original technology used in the STERRAD® 100S system.

The STERRAD® 100NX® System utilizes a large rectangular chamber to process a wide number of instruments quickly, safely and efficiently and meet your growing reprocessing demands.

  • Expanded lumen capacity claims allow for processing single-channel, stainless steel lumens with an inside diameter of >0.7 mm and a length of up to 500 mm plus single-channel polyethylene and Teflon® flexible endoscopes with an inside diameter of >1 mm and a length of up to 850 mm. Ability to process up to two single-channel flexible endoscopes in one cycle
  • Features the latest information technology advances: RFID-tagged cassettes, a built-in USB port, and an optional Independent Monitoring System
  • Permits convenient hands-free opening and closing of chamber door via ergonomic footpad

STERRAD® 100NX® System Specifications

Technical Specifications
Total Cycle Time

STANDARD Cycle: 47 minutes
FLEX Cycle: 42 minutes
EXPRESS Cycle: 24 minutes
DUO Cycle: 60 minutes

Cycle Temperature Less than 55°C
Dimensions and Weight
Height 1791 mm
Width 775 mm
Depth 1020 mm
Weight 425 kg single-door
457 kg double-door
Installation and Electrical Requirements
Connections 380 - 415V 50/60 Hz Power. The sterilizer requires a five-wire grounding outlet attached to a dedicated 30 AMP, 3 phase, (200-240VAC, 380-415V) ±10%, 50/60 Hz ±5% circuit with separate neutral and ground conductors.
Service Requirements Service access requires a minimum clearance of 39.5 in (100 cm) on front, back, top and sides of the system.
Operational Environment
Temperature 18°C to 35°C
Humidity 10% to 85% up to 30°C, linearly decreasing from 85% at 30°C to 70% at 40°C (non-condensing)
Independent Monitoring System (IMS) Enables remote, independent monitoring of all processes and is available as an option
Barcode Reader Available as an option

* Please contact your ASP representative to determine maximum chamber capacity based on your facility's particular sterilization load configuration(s).

Find out more about the STERRAD® 100NX® System

Download Adobe Acrobat or Macromedia Flash for viewing files. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.

Confirmation link

This link will take you to a Web site to which this Privacy Policy does not apply.

We encourage you to read the Privacy Policy of every Web site you visit.