Next generation low temperature sterilizer
Designed with the Next Generation technology, the STERRAD® 100NX System is the most advanced low temperature gas plasma sterilizer from ASP:
Please refer to the STERRAD® 100NX® User's guide for more detailed processing information.
* da Vinci® 3-D endoscopes are validated for use in the STERRAD® 100NX® System EXPRESS
cycle and are not validated for use in the STERRAD® 100NX® System STANDARD and FLEX
cycles.
Consult the STERRAD® Sterility Guide, www.sterradsterilityguide.com, refer
to the STERRAD® Sterilization System User's Guide or contact medical device
manufacturer for the detailed processing information.
The STERRAD® 100NX® System uses the Next Generation (NX) sterilization technology of hydrogen peroxide concentration that allows for the sterilization of narrower lumens with a shorter cycle time comparing to the original technology used in the STERRAD® 100S system.
The STERRAD® 100NX® System utilizes a large rectangular chamber to process a wide number of instruments quickly, safely and efficiently and meet your growing reprocessing demands.
Technical Specifications | ||||
Total Cycle Time |
STANDARD Cycle: 47 minutes |
|||
Cycle Temperature | Less than 55°C | |||
Dimensions and Weight | ||||
Height | 1791 mm | |||
Width | 775 mm | |||
Depth | 1020 mm | |||
Weight | 425 kg single-door 457 kg double-door |
|||
Installation and Electrical Requirements | ||||
Connections | 380 - 415V 50/60 Hz Power. The sterilizer requires a five-wire grounding outlet attached to a dedicated 30 AMP, 3 phase, (200-240VAC, 380-415V) ±10%, 50/60 Hz ±5% circuit with separate neutral and ground conductors. | |||
Service Requirements | Service access requires a minimum clearance of 39.5 in (100 cm) on front, back, top and sides of the system. | |||
Operational Environment | ||||
Temperature | 18°C to 35°C | |||
Humidity | 10% to 85% up to 30°C, linearly decreasing from 85% at 30°C to 70% at 40°C (non-condensing) | |||
Independent Monitoring System (IMS) | Enables remote, independent monitoring of all processes and is available as an option | |||
Barcode Reader | Available as an option |
* Please contact your ASP representative to determine maximum chamber capacity based on your facility's particular sterilization load configuration(s).
STERRAD® 100NX® System Leaflet
® 100NX® Cycle Selection Wallchart
Download Adobe Acrobat or Macromedia Flash for viewing files. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
This link will take you to a Web site to which this Privacy Policy does not apply.
We encourage you to read the Privacy Policy of every Web site you visit.